Foshan Kun Liu Sheng Composite Material Co.,Ltd

On Wednesday, the International Trade Commission (ITC) found that steel truck hubs imported from China had caused substantial damage to domestic manufacturers and would impose high tariffs on these imports for five years. The U.S. Department of Commerce has previously ruled that these imported Chinese hubs are suspected of dumping and enjoy unfair subsidies. The decision came after the U.S. Department of Commerce ruled in March that it would impose 321% anti-dumping duty and 457% anti-subsidy duty on all Chinese steel hub manufacturers. The ruling was directed at 22.5-Inch and 24.5-inch steel hubs made in China, mainly for medium and large trucks and other commercial vehicles. In 2017, imports of such hub products in the United States totalled $388 million.

On the afternoon of April 8, under the joint witness of Chen Derong, Secretary of the CPC Committee of Baowu, Chairman of the Board, and Zheng Jianhua, Secretary of the Shanghai Electric Party Committee and Chairman of the Board, Baowu and Shanghai Electric signed the strategic cooperation framework agreement. Zou Jixin, Standing Committee of CPC Committee of Baowu, Secretary of CPC Committee of Baosteel, Chairman of the Board, and Lu Yachen, Vice President of Shanghai Electric Company, and Dong Jianhua attended the signing ceremony. Guo Bin, Vice President of Baowu, China, and Zhang Ke, Vice President of Shanghai Electric Company signed the agreement on behalf of both sides. According to the agreement, the two sides will actively respond to the national strategy of "one belt road initiative" and "Yangtze River Delta integration" regional development, give full play to their respective information, resources and channel advantages, and jointly develop overseas ma...

As a  Metallic Clad Plate Supplier , let's talk about the main factors of stainless steel corrosion. There are three main factors affecting the corrosion of stainless steel: 1. The content of alloying elements. Generally speaking, the content of chromium in 10.5% steel is not easy to rust. The higher the content of chrome nickel, the better the corrosion resistance. For example, Stainless Steel Sheet Grade 304 has a nickel content of 8-10% and a chromium content of 18-20%. Such stainless steel will not rust under normal conditions.  2. The smelting process of the production enterprise will also affect the corrosion resistance of stainless steel. The large stainless steel plant with good smelting technology, advanced equipment and advanced technology can guarantee the control of alloy elements, the removal of impurities and the control of the cooling temperature of the slab. Therefore, the product quality is stable and reliable, the internal quality is good, and it is not ...

In April 2nd, new Haixu, the world's largest suction dredger built by Jiangsu Haixin heavy industry heavy industry, set sail from Haimen, Jiangsu, and will travel to Saudi Arabia to serve the "one belt and one road" construction operation. Captain Xinhaixu 138 m, 28 m wide, 8 m deep and 36 m deep, with a total installed power of 26100 kw, can dig 6,500 cubic meters per hour. It is equipped with heavy cutters, three dredging pumps, heavy steel pile trolleys and three cable positioning system, anchor throwing rods, barge loading system and Integrated Dredging monitoring system. It also has the strongest dredging capacity in the world, and can dig clay, compact sand and gravel. Non-self-propelled cutter suction dredging equipment for strong weathered rock and weak weathered rock. It is reported that "New Haixu" was developed by Shanghai Jiaotong University, with the participation of the National Engineering Research Center of China Jiaotong Dredging, with ...

On the morning of March 23, witnessed by the leaders of China and Italy, Benxi Steel Group Co., Ltd. and Shanghai Electric Group jointly signed the purchase agreement of AE94.2K gas turbine and synthetic gas compressor units for Benxi Steel CCPP power generation project with Ansardo Energy Group, Italy. Chen Jizhuang, Secretary and Chairman of the Party Committee of Benxi Iron and Steel Group Co., Ltd., Huang Ou, Vice Secretary and President of the Party Committee of Shanghai Electric Group Co., Ltd., signed the agreement with Juseppe Zampini, CEO of Ansardo Energy Group, Italy. This time, the AE94.2K gas turbine and syngas compressor units purchased under the agreement are mainly used in the CCPP power generation project of Benxi Steel Plate Co., Ltd. This project is an important energy-saving and environmental protection project of Benxi Iron and Steel Group. It adopts the world's advanced low calorific value fuel (blast furnace, coke oven mixed gas) gas-steam combined cycle p...

AK Steel recently announced that it would close its Ashland plant in Kentucky by the end of this year and focus on producing innovative and value-added differentiated products. It is understood that most production lines (including blast furnaces) in Ashland Plant have been in a state of shutdown since the end of 2015, and only hot-dip galvanizing production lines remain in normal production. AK Steel said that the closure of the plant's blast furnaces and steelmaking equipment was mainly aimed at reducing production costs. Transferring hot-dip galvanized products from Ashland to other branches would not affect the supply of customers, but would also effectively improve the productivity utilization and production efficiency of other branches, thereby further reducing the production costs of hot-dip galvanized products and enhancing the market competitiveness of the products. AK Steel pointed out that the cost of closing the Ashland plant was about $80 million, which could save...

AK Steel recently announced that it would close its Ashland plant in Kentucky by the end of this year and focus on producing innovative and value-added differentiated products. It is understood that most production lines (including blast furnaces) in Ashland Plant have been in a state of shutdown since the end of 2015, and only hot-dip galvanizing production lines remain in normal production. AK Steel said that the closure of the plant's blast furnaces and steelmaking equipment was mainly aimed at reducing production costs. Transferring hot-dip galvanized products from Ashland to other branches would not affect the supply of customers, but would also effectively improve the productivity utilization and production efficiency of other branches, thereby further reducing the production costs of hot-dip galvanized products and enhancing the market competitiveness of the products. AK Steel pointed out that the cost of closing the Ashland plant was about $80 million, which could save...

The launching ceremony of "Automation, Digitization and Intelligence Construction Project of Stainless Steel Industry in Xinxing County" co-sponsored by Guangdong Productivity Promotion Center, Guangdong Intelligent Manufacturing Research Institute and County Economic and Credit Bureau was held in Xinxing County Innovation Center. On behalf of the county government, the responsible persons of Xinxing County congratulated the county on the initiation of the automation, digitization and intellectualization construction projects of  Stainless Steel Industry , and thanked all parties for their concern and support for the social and economic development of Xinxing County. The location advantage of Xinxing County is increasing, and the stainless steel kitchenware industry has become a larger industrial cluster with considerable development prospects. At present, the development of  Stainless Steel Kitchenware  industry is also facing constraints. Therefore, relevant enterp...